In Australia, there are many different types of the most modern car tyres. The one you choose will depend on factors such as car, driving style, where you live, the time of year and how your car is used. If you are looking for Tyres in Australia, we recommend using Ozzy Tyres’ tyre finding tool which can be found at http://www.ozzytyres.com.au/tyres.html
For example, if you spend a lot of working day moving up and down the motorways, you will need a wear-resistant tyre that does not create much noise. If you live in a rural area, a tyre that provides better grip with dirty roads will be more suitable.
This article describes five different types of car tyres and shows some differences between them:
1) Standard / all-season tyre
Probably, your car was driven from the factory on all-season tyres. This is an average tyre that is suitable for year-round use. It works well in a wet and dry state.
The tread block pattern should not be noisy when used on standard roads but provides sufficient dispersion of water to give adhesion in wet conditions.
The rubber used is a more complex connection for extending the life of the tyre. This may include handling and rotation, but for most drivers, this is not noticeable.
2) Operating Bus
Also known as summer tyres, tyres with characteristics are designed to provide an excellent grip in a dry condition. It is often used on fast cars or for a driver whose style requires increased productivity. They can be used all year round if you live in a region with a warm climate and a little rain.
A soft rubber compound is used, which reduces the service life of the tyre, but provides improved grip.
It is important that the car tyres were in excellent condition. Driving in the wet state is quite difficult with these tyres, but if there are any signs of wear, it is almost impossible to get a good grip.
3) Winter tyre
Winter car tyres are designed to cope with the bad weather and difficult driving conditions that the winter season brings. They can handle snow and ice. Winter tyres can have small metal studs built into the protector for additional traction in extreme conditions.
The tread pattern on winter tyres is larger and more pronounced than on standard tyres. This improves grip but also increases tyre noise.
These tyres can not be used all year round because in arid conditions they wear out very quickly and damage the road surface.
4) All tyres
The tyres of all tyres provide good adhesion to loose surfaces, such as dirt and sand. Often used by SUVs, they can be used on standard roads, but very noisy.
Like the winter tyre, the tread pattern is large to improve grip. The lateral walls of the tyre are more rigid to copes with uneven surfaces also unexpected potholes.
Tyres for drilling mud are the extreme type of all relief tyres designed for use in mud and mud. They have huge tread patterns that are suitable only for driving on this type of terrain.
5) Run flat tyres
The launch of flat tyres is a relatively new concept, but now they are becoming more common on new cars. They are designeds to minimize the loss of processing which occur after a puncture.
The most popular car tyres in Australia can work without air so that the car continues to move. However, this is only suitable for a short distance and at a reduced speed until the tyre is safely changed.
For further advice, consult the most popular car tyres in a specialist from Australia who will provide you with impartial advice on the best tyres for your car.